ASTM D892 | ASTM D6082 - Apparatus (AIR Bath Module) for the evaluation of Foaming Characteristics of Lubricating OilsModel FT-D892-A-C/H: Individual AIR bath Module for measuring the foaming tendencies of lubricating oils in the temperature range of +24’c, 93.5’c and +150°C. For improved consistency of results, each module is equipped with Mass Flow Controller and Totalizer.
ASTM D892 | ASTM D6082 - Apparatus (Liquid) for the evaluation of Foaming Characteristics of Lubricating OilsModel FT-D892-L-4: Two glass jars mounted on a supporting base. Each jar accepts TWO, 1-liter test cylinders for ASTM D892 testing. One bath is typically controlled at 24 C and the other for 93.5 C. For improved consistency of results, apparatus is equipped with Mass Flow Controller and optionally a Totalizer.
ASTM D1401 – Apparatus for the evaluation of Water Separability of Petroleum Oils and Synthetic FluidsModel WS-D1401-L-7: Seven test positions apparatus that meets the full requirements of ASTM D1401 and related Water Separability (Demulsability) methods.
ASTM D1881 – Apparatus for the determination of Foaming Tendencies of Engine CoolantsModel FT-D1881-L-2: Manual Heated Liquid Bath with 2 flowmeters, 2 test positions
ASTM D8277 | AFNOR NEF E48-690/691 | ISO 13357 - Automated Apparatus for Hydraulic Oil Filterability test. Model HFLT-AFNOR-AT-2/4: Automatic Hydraulic Oil Filterability Apparatus, 2,4 test positions models available, Each position is independently controlled by a Windows-based Touchscreen PC.
ASTM D8277 | AFNOR NEF E48-690 | NF E48-691 | ISO 13357 - Manual Apparatus for Hydraulic Oil Filterability test. Model HFLT-AFNOR-M-2 : Manual Hydraulic Oil Filterability Apparatus, 2 test positions model available, Each positions can be independently controlled.
ASTM D2983 – Apparatus (Liquid) for measuring Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational ViscometerModel: LTRV-D2983-L-10 Programmable Liquid Bath with a Rotational Viscometer for measuring Low-Temperature Viscosity. 10 positions model is available
ASTM D2983 – Apparatus (AIR) for measuring Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational ViscometerModel: LTRV-D2983-A-6 is an AIR Bath with a Rotational Viscometer for measuring Low-Temperature Viscosity. 6 positions model is available
ASTM D2619 - Apparatus for the evaluation of Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)Model HYBT-D2619-12 - Hydrolytic Stability Bottle Tumbler / Oven for rotating TWELVE 200 ml (7 oz) bottles at 93°C. Confirms to ASTM D2619
DKA A&B CEC L 48 - Apparatus for the determination of High Temperature Oxidation stability testing for ATF and Gear Oil.Model OXY-DKA-IHT-X : Manual Individual Heated Tube Apparatus (DRY) for Oxidation Stability of ATF and Gear Oil. 4, 6, and 8 Positions models equipped with Rotameter / MFC available.
ASTM D943 | ASTM D2893 | ASTM D4871 | ASTM D5846 | ASTM D6594 | ASTM D4310 | S200 -
Apparatus for the determination of Oxidation Characteristics of various lubricants / Industrial oils. (MFC Models) Model OXI-X-IHT-X: Manual Individual Heated Tube Apparatus (DRY) for Oxidation Stability of various lubricants / Industrial oils. 2, 4, 6, and 8 Positions models available.
ASTM D4636 | FTM-5307 | FTM-5308 - Apparatus for the determination of Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined OilsModel OXI-X-IHT-X: Manual Individual Heated Tube Apparatus (DRY) for Oxidation Stability of various lubricants / Industrial oils. 2, 4, 6, and 8 Positions models available with Rotameter / MFC options.
ASTM D130 – Apparatus for Copper Strip Corrosion test (Test Tube Procedure)Model CSC-D130-B-8 : Manual DRY Aluminum block apparatus for test tube procedures. 8 positions model available.
ASTM D943 | ASTM D2893 | ASTM D4871 | ASTM D5846 | ASTM D6594 | ASTM D4310 | S200 -
Apparatus for the determination of Oxidation Characteristics of various lubricants / Industrial oils. (Rotameter Models) Model OXI-X-IHT-X: Manual Individual Heated Tube Apparatus (DRY) for Oxidation Stability of various lubricants / Industrial oils. 2, 4, 6, and 8 Positions models available.
ASTM D943 | ASTM D2893 | ASTM D5846 | ASTM D6594 | ASTM D4310 - Apparatus for the determination of Oxidation Characteristics of various lubricants / Industrial oils.Model OXY-X-L-X: Manual LIQUID Bath for Oxidation Stability of various lubricants / Industrial oils. 4, 6, 8, 12 and 15 Positions models available.
ASTM D97 | ASTM D2500 – Aluminum block (DRY) apparatus for the cold flow properties analysisModel CP-D97-B-X : Manual aluminum block (DRY) bench top apparatus, engineered with Stirling Cryo cooling system capable of reaching -70°C. Four and five temperature position units are available, with four or eight test jackets for each temperature position.
ASTM D97 | ASTM D2500 – Manual Liquid bath for cold properties analysis.Model CP-D97-L-X: Manual agitated liquid bath for Cloud Point, Pour Point of petroleum Products
DIN 51 351 | FTM 791-1303 – Apparatus for the determination of Flock Point Determination of Refrigerating Oils.Model FLCK-DIN-L-9: Mechanically agitated low temperature LIQUID bath able to accept 9 test tubes as specified by DIN 51 531 test method for determination of flock point (compatibility) of refrigerants with refrigeration oils. Operating Temperature is 15°C to -70°C
ASTM D445 – Apparatus for measuring the Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)Model HTKV-D445-L-7 : Manual High (40’C to 150’c) and Low (-20’c to -65’c) Temperature Liquid Bath for the determination of the kinematic viscosity of liquid petroleum products, both transparent and opaque.
ASTM D665 – Apparatus for the evaluation of rust-preventing characteristics of inhibited mineral oil in the presence of waterModel RU-D665-L-4/6 : Manual Liquid bath for the evaluation of Rust-Preventing Characteristics. 4 and 6 positions models available.
ASTM D6557 - Apparatus Assembly for the Evaluation of Rust Preventive Characteristics of Automotive Engine OilsModel RU-D6557-M-X : Bench test Arrangement for determining the Rust Preventive Characteristics of Automotive Engine Oils
ASTM D6794 | ASTM D6795 - Apparatus for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) / Short (30 min) Heating TimeModel RU-D6794/95-M-X : Apparatus for the determination of the tendency of an oil to form a precipitate that can plug an oil filter
IP 48 - Apparatus (Cigre Bath) for Determination of Oxidation Characteristics of Lubricanting oils Model : OXI-IP48-B-12 : Heated Aluminium Block Oxidation Bath, 12 test positions with 12 flowmeters
ASTM D 2440 - Apparatus for determination of Oxidation Stability of Mineral Insulating OilModel : OXI-D2440-B-12 : Heated Aluminium Block Oxidation Bath, 12 test positions with 12 flowmeters
CEC-L-109 - Apparatus for the Oxidation Test for Engine Oils Operating in the Presence of Biodiesel Fuel.Model OXI-CECL109-X - Manual liquid bath to check the oxidation performance of engine oils in LD and HD engines run with biodiesel. 4, 6, 8, and 12 Positions models available with MFC / Rotameter option
ASTM D7528 - Apparatus for Romaszewski Oil Bench Oxidation (ROBO), for Bench Oxidation of Engine OilsModel ROBO-D7320-M1 : Manual Apparatus / stand assembly for Bench Oxidation test - ROBO.
